Plasmonic Bi nanoparticle decorated BiVO4/rGO as an efficient photoanode for photoelectrochemical water splitting

We report the application of plasmonic Bi nanoparticles supported rGO/BiVO₄ anode for photoelectrochemical (PEC) water splitting. Nearly, 2.5 times higher activity was observed for Bi-rGO/BiVO₄ composite than pristine BiVO₄. Typical results indicated that Bi-rGO/BiVO₄ exhibits the highest current density of 6.05 mA/cm² at 1.23 V, whereas Bi–BiVO₄ showed the current density of only 3.56 mA/cm². This enhancement in PEC activity on introduction of Bi-rGO is due to the surface plasmonic behavior of BiNPs, which improves the absorption of radiation thereby reduces the charge recombination. Further, the composite electrode showed good solar to hydrogen conversion efficiency, appreciable incident photon-to-current efficiency and low charge transfer resistance. Hence, Bi-rGO/BiVO₄ provides an opportunity to realize PEC water splitting.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.     

A distributed state estimation method for power systems incorporating linear and nonlinear models

High-voltage transmission networks are commonly equipped with phasor measurement units (PMU), and some of them are PMU observable. However, PMUs are seldom installed in distribution networks due to budget limitations. The state estimation equations of PMU observable areas are linear, while those of other areas remain nonlinear. This paper proposes a new distributed state estimation method for solving multi-area state estimation problems, in which linear models are used for high-voltage transmission network, while nonlinear models are adopted for other areas. In PMU observable area, we select coordinating variables as generalized cost functions which accurately represent the sensitivity between the linear SE objective function and boundary states. Consequently, SE results identical to a centralized estimator can be obtained without iterations at the coordination level. This paper presents the problem model and theoretical analysis of the proposed method, and shows its effectiveness by numerical tests.     

田赛距离测量中全站仪的设计与实现

本文提出了将智能全站仪这种精密测量仪器广泛应用于田赛项目测量中，并结合其他科技元素用于解决田赛项目中跳远、投掷等项目的测量及数据管理问题，实现实时、自动、准确地裁定和报告比赛成绩。     

An integrated approach for sustainable supply chain planning

This paper proposes an integrated approach for transposing sustainable development principles to supply chain planning models. Inspired by research on performance measurement, we designed a method that links sustainability performance to supply chain decisions, and allows setting coherent performance measures. By transposing this method to a multi-objective mathematical programming, the supply chain planning is optimized while the economic, environmental and social performances are all coherently integrated into the model. To illustrate our approach, we applied it to a Canadian lumber industry case. We solved the mathematical model by using the weighted goal programming technique, which results in a set of “compromise” solutions allowing the decision maker to choose the alternative that reflects the balance he/she wishes to make regarding the three dimensions of sustainability.     

Characterization of a plasma polymer coating from an organophosphorus silane deposited at atmospheric pressure for fire-retardant purposes

Protective coatings from diethylphosphatoethyltriethoxysilane (DEPETS) have been deposited on different polymer substrates in a plasma discharge operated at atmospheric pressure. Plasma polymer chemistry and structure were characterized by means of Fourier transform infrared spectroscopy (FTIR), laser desorption ionization-mass spectrometry (LDI-MS), nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM). A chemical structure of the plasma polymer has been proposed based on the coating molecular characterization. Coatings were deposited on polycarbonate (PC) and polyamide 6 (PA6) substrates. The flame retardant properties of coated substrate samples were assessed using cone calorimetry and compared to those of bare substrates. A significant increase in the time to ignition (TTI), up to +143%, was recorded after coating deposition due to the formation of a high-performance barrier layer at the surface of both polymer substrates.     

Cell-Free Synthesis of Selenoproteins in High Yield and Purity for Selective Protein Tagging

The selenol group of selenocysteine is much more nucleophilic than the thiol group of cysteine. Selenocysteine residues in proteins thus offer reactive points for rapid post-translational modification. Herein, we show that selenoproteins can be expressed in high yield and purity by cell-free protein synthesis by global substitution of cysteine by selenocysteine. Complete alkylation of solvent-exposed selenocysteine residues was achieved in 10 minutes with 4-chloromethylene dipicolinic acid (4Cl-MDPA) under conditions that left cysteine residues unchanged even after overnight incubation. Gd^III−Gd^III distances measured by double electron–electron resonance (DEER) experiments of maltose binding protein (MBP) containing two selenocysteine residues tagged with 4Cl-MDPA-Gd^III were indistinguishable from Gd^III−Gd^III distances measured of MBP containing cysteine reacted with 4Br-MDPA tags.     

Assessment of digital image correlation method in determining large scale cemented rockfill strains

A conventional contact method(using linear transducers) and a non-contact method are deployed to measure the axial and lateral deformations of large scale cylindrical cemented rockfill specimens.Experimental works incorporating two pinhole cameras to create one stereovision by digital image correlation shows that the non-contact method is as reliable for testing large cylindrical specimens as measurements done by using linear variable displacement transformer and string potentiometer. Considering this particular large specimen, the experiment resulted in the acceptable mean difference between lateral strain using both methods is 5.1 percent, and 14.5 percent for the axial strain. This occurrence is inevitable due to the heterogeneity of the concrete system and the placement of the monitoring point in digital image correlation method, although the comparison of stress-strain relationship in both methods still indicates a conformity. Based on the results of the present experiments, the authors recommend the noncontact method for a detailed investigation of the material behavior during the uniaxial compressive strength tests. Full field strain measurement enables this digital method to examine local strains near cracks at any point, a very useful tool for studying material deformation behavior.     

Reduction of temperature influence in stress measurement using surface SH‐wave acoustoelasticity

Stress measurements are required to prevent collapse accidents of structures. Surface SH‐wave acoustoelasticity can measure principal stress difference nondestructively and easily. Currently, surface SH‐wave acoustoelasticity can measure with high precision using a T‐type surface SH‐wave sensor in ideal environments such as in the laboratory. However, in actual environments, it cannot be measured with high precision due to change in the temperature of the specimen. In this paper, temperature dependence of surface SH‐wave acoustoelastic constants was verified to investigate the influence of specimen temperature on surface SH‐wave acoustoelasticity. In addition, the measuring system of surface SH‐wave acoustoelasticity using a cross T‐type surface SH‐wave sensor to reduce the influence of specimen temperature was developed.